| Specification |
Type: Rotary Encoder;
Working Principle: Absolute;
Readout Mode: Contact;
Operating System: Contact Brush Type;
Signal Output: Long Drive Output;
Axle Sleeve Type: Large Diameter Type;
Package: PGA;
Installation Form: Standard DIN35 Rail Installation;
Brand: Wayjunr;
Axonia: Servo Installation Type;
Input Type: Encoder Ab Signal Input, 8 Channels (A0/B0~ A7/B7);
Low Level: Input <1V;
High Level: Input 3.5 ~ 30V;
Power Consumption: Less Than 1W;
Working Temperature: -45 ~ +80ºC;
Working Humidity: 10 ~ 90% (Non-Condensing);
Storage Temperature: -45 ~ +80ºC;
Storage Humidity: 10 ~ 95% (No Condensation);
Isolation Withstand Voltage: 3000V Isolation Between Di;
|
Type: Rotary Encoder;
Working Principle: Absolute;
Readout Mode: Contact;
Operating System: Magnetoelectric Type;
Signal Output: Canopen;
Axle Sleeve Type: Half Empty Type;
Package: PGA;
Installation Form: Axle Sleeve Type;
Brand: Repgn;
Axonia: Synchronous Flange Type;
Shaft Diameter: 6, 8, 10, 12, 15 mm (Other Diameters Available on;
Housing Material: Aluminum (Optional Stainless Steel Housing);
Signal Output Interface: Canopen;
Output Circuit: Compliant with ISO 11898, Opto-Isolated Electrical;
Supported Protocols: Canopen Cia Ds301 V4.02; DSP 305 (Lss Protocol); D;
|
Type: Rotary Encoder;
Working Principle: Incremental;
Readout Mode: Contact;
Operating System: Photoelectric Type;
Signal Output: Line driver; push-pull; Voltage output; OC(NPN); O;
Axle Sleeve Type: Large Diameter Type;
Package: PGA;
Installation Form: Axle Sleeve Type;
Brand: Repgn;
Axonia: Synchronous Flange Type;
Operating temperature: -40 °C...+70 °C;
Ingress protection class (IEC 60529): IP67 (IP66 at shaft inlet);
Vibration (IEC 60068-2-64): ≤ 300 m/s²;
Rotational speed max: 6000 rpm;
|
Type: Rotary Encoder;
Working Principle: Absolute;
Readout Mode: Contact;
Operating System: Magnetoelectric Type;
Signal Output: Standard 0-10V 0-5V;
Axle Sleeve Type: Large Diameter Type;
Package: PGA;
Installation Form: Axle Sleeve Type;
Brand: Repgn;
Axonia: Synchronous Flange Type;
Power Supply Voltage: 5VDC, 10-30VDC;
Single-turn Resolution: Standard 12-bit/4096, 13-bit/8192, 16-bit/65536;
Consumption Current: 70mA;
Load Current: 80mA;
|
Type: Rotary Encoder;
Working Principle: Absolute;
Readout Mode: Contact;
Operating System: Magnetoelectric Type;
Signal Output: Standard 0-10V 0-5V;
Axle Sleeve Type: Large Diameter Type;
Package: PGA;
Installation Form: Axle Sleeve Type;
Brand: Repgn;
Axonia: Synchronous Flange Type;
Housing Material: Aluminum (stainless steel optional);
Signal Output Interface: RS485 custom protocol, optional Modbus-RTU + incre;
Baud Rate (bps): 4800; 9600; 19200; 38400; 57600; 115200;
Address Range: 0-99;
|