| Specification |
Type: Servo;
Output Signal Type: Digital Output;
Measuring Shaft Quantities: 1;
Accuracy Grade: 0.2G;
IP Rating: IP67;
Customized: Customized;
Data Transmission Interfaces: RS422;
|
Type: Piezoelectric;
Output Signal Type: Analog Output;
Measuring Shaft Quantities: Single;
Accuracy Grade: 0.5G;
IP Rating: IP65;
Customized: Customized;
Measure Range(Peak): ±50g;
Sensitivity(25℃): 100mv/G;
Frequency Response(±10%): 1~6000Hz;
Frequency Response(±3dB): 0.5~10000Hz;
Resonance Frequency: 20000Hz;
Driving Voltage: 18~28(Constant-Current Source)VDC;
Operation Temp: -40℃~+85℃;
Shock Resistance(Peak): 2000 G;
Structural Style: Cutting/Pzt-5;
Shell Material: 304 Stainless Steel;
Output Way: 5/8-24 Two-Core Socket;
Installation: 1/4-28 Female Thread;
Accessory: 1/4-28 to M6 Bolt;
Connecting Cable: Mil Two-Core Connecting Cable 3 Meters;
|
Output Signal Type: Tx and Rx;
IP Rating: IP67;
GPS: L1ca, L2p (Y), L2c, L5;
Bds: B1I, B2I, B3I;
Glonass: L1, L2;
Galileo: E1, E5a, E5b;
Qzss: L1, L2, L5;
Sbas: L1;
Channels: 1408;
Dimension: 158.4 mm X 142.4 mm X 33.6 mm;
Weight: 670g;
|
Manufacturer: Honeywell;
Supply Voltage: -40°C to 150°C VDD;
Supply Current: VDD = 2.5V to 22V;
Output Saturation Voltage: at 20mA, Gauss > BOP;
High Sensitivity: Typical BOP/BRP = +30 / -30 Gauss;
Wide operating temperature: -40°C to 150°C;
Output Rise Time: RLOAD = 820 Ω, CLOAD = 10 pF; TA = 25°C;
Output Fall Time: RLOAD = 820 Ω, CLOAD = 10 pF; TA = 25°C;
Magnetic Operating Point: VDD = 3.3V, TA = -40 to 150°C;
Magnetic Release Point: VDD = 3.3V, TA = -40 to 150°C;
Magnetic Hysteresis Window: VDD = 3.3V, TA = -40 to 150°C;
Mounting Method: Surface mount (suitable for automated SMT assembly;
|
Manufacturer: Honeywell;
Supply Voltage: -40°C to 150°C VDD;
Supply Current: VDD = 2.5V to 22V;
Output Saturation Voltage: at 20mA, Gauss > BOP;
High Sensitivity: Typical BOP/BRP = +30 / -30 Gauss;
Wide operating temperature: -40°C to 150°C;
Output Rise Time: RLOAD = 820 Ω, CLOAD = 10 pF; TA = 25°C;
Output Fall Time: RLOAD = 820 Ω, CLOAD = 10 pF; TA = 25°C;
Magnetic Operating Point: VDD = 3.3V, TA = -40 to 150°C;
Magnetic Release Point: VDD = 3.3V, TA = -40 to 150°C;
Magnetic Hysteresis Window: VDD = 3.3V, TA = -40 to 150°C;
Mounting Method: Through-hole mounting (suitable for manual solderi;
|