| Specification |
Type: Liquid Level Transmitter;
Structure Design: Threaded, Flange Connecting, Coaxial, Side type;
Pressure Range: 0~250bar(0~25MPa);
Display Type: LCD;
Accuracy Grade: ±3mm;
IP Rating: IP67/IP68;
Customized: Customized;
Measurement Principle: Time Domain Reflectometry (TDR) measurement;
Dielectric Constant: ≥1.4;
Measurement parameters: Liquid level/interface, material level;
Housing Structure: Dual-Chamber;
Housing Material: High pressure cast aluminum, stainless steel;
Cable Entry: 1/2"NPT or M20×1.5;
Material: 316LSST, 304SST, 316SST, Titanium, 304LSST, etc.;
Input Voltage: 13.5~30V DC, with polarity reversal protection;
Output Signal: 2-wire 4~20mA DC, HART;
Fault Signal: High value alarm 21mA, Low value alarm 3.6mA;
Operation Temperature: -320~1000℉(-196~538℃);
Ambitent Temperature: -40~176℉(-40~80℃);
Humidity: 0~100% Relative humidity;
Process Display: Display 4-20mA, percentage, engineering unit;
Output Unit: ft, in, m, cm, mm;
|
Type: Silicon Piezoresistive Type;
Structure Design: Input Type;
Pressure Range: High Pressure;
Display Type: Decile Calibration;
Accuracy Grade: 0.5G;
IP Rating: IP65;
Customized: Customized;
Measuring Medium: Liquid;
Type.: Guided Wave Radar Level;
Measurement Range: 0-15m;
Accuracy: 5mm or 0.15%;
|
Type: Silicon Piezoresistive Type;
Structure Design: Input Type;
Pressure Range: High Pressure;
Display Type: Decile Calibration;
Accuracy Grade: 0.5G;
IP Rating: IP65;
Customized: Customized;
Measuring Medium: Liquid;
Type.: Guided Wave Radar Level;
Measurement Range: 0-15m;
|
Power supply: 24V;
Output signal: relay, PNP, NPN;
Process Connection: thread;
Medium temperature: -40~110 centi degree;
Process pressure: -0.1~10MPa;
Wetted material: PEEK SS304 or 316L;
Wetted surface roughness: Ra< 0.8 μm;
Shell material: SS304 , SS316L;
Measurement hysteresis: ±1mm;
Medium characteristics: DC≥1.5;
Response time: 0.2s;
Damping time: 0s by default;
Supply current (no load): 8mA (typical); 50mA (maximum);
|
Power supply: 24V;
Output signal: relay, PNP, NPN;
Process Connection: thread;
Medium temperature: -40~110 centi degree;
Process pressure: -0.1~10MPa;
Wetted material: PEEK SS304 or 316L;
Wetted surface roughness: Ra< 0.8 μm;
Shell material: SS304 , SS316L;
Measurement hysteresis: ±1mm;
Medium characteristics: DC≥1.5;
Response time: 0.2s;
Damping time: 0s by default;
Supply current (no load): 8mA (typical); 50mA (maximum);
|