| Specification |
Hi-Fi: Not Hi-Fi;
Activity: Passive;
Operation Mode: External Amplifier and DSP Control;
Speaker System: Optional Combination;
Speaker Material: Wood;
Application: Commercial, Large Venues, Concerts, Performance Halls, Outdoor;
Main Speaker Configuration: 8 × Tx-20PRO + 4 × Tx-20bpro + 2 × Tx-218;
Main Speaker Type: Dual 10-Inch Two-Way Line Array;
Low Frequency System: 4 Single 18-Inch + 2 Dual 18-Inch Subwoofers;
Main Speaker Maximum Spl: 132 Db AES / 138 Db Peak Per Cabinet;
Frequency Extension: Down to 29 Hz;
|
Noise: <102dB;
Activity: Active;
Speaker Material: Metal;
Application: Commercial, Home;
Input Channels: 16 Balanced. Mic/Line Level;
Connectors: 3.81 mm Phoenix Contact, 12-Pin;
Input Impedance: 11.5KΩ;
Maximum Input Leve: 14dbu/Line, -7dbu/Mic;
Phantom Power: +48VDC, 10mA, Selectable Per Input;
Output Channels: 16 Balanced, Line Leve;
Output Impedance: 150Ω;
Frequency Response: 20Hz-20kHz(+-0.5dB)/Line 20Hz-20kHz(+-1.5dB)/Mic;
Thd+N: -90dB(@12dbu,1kHz,a-Wt)/Line -86dB(@-7dbu,1kHz,a-W;
Snr: 105dB(@12dbu,1kHz,a-Wt)/Line 95dB(@-7dbu,1kHz,a-Wt;
USB: Micro-B Type, Free Driver;
RS232: Serial Port Communication;
Tcpip: Rj-45, Optional;
LED Status Indicators: Power, Link, +48V, Input and Output Audio Signal;
Mains Voltage: AC100V---240V 50/60 Hz;
|
Speaker Material: Metal;
Application: Commercial, Home;
Monitor: Without Screen;
Input Channels(Analog): 12;
Output Channels(Analog): 8;
Processor: Adi Sharc 21489@450 MHz Simd;
DSP Handling Capacity: 400 Mips, 1.6 Gflops;
Sampling Rate: 48K/40bit;
Frequency Response: (20~20kHz):±0.3dB;
Thd+N: <-94dB @17dbu;
Output Dynamic Range: 112dB;
Output Impedance (Balanced Connection): 600Ω;
System Latency: <3ms;
Dimension: 482 X 260 X 45mm;
Channel Isolation @1kHz: 108dB;
Maximum Level: +18dbu;
Weight: 4kg;
|
Noise: ≥105dB;
Operation Mode: Knob Control;
Speaker Material: Metal;
THD: Less Than 0.02%;
Input Channels(Analog): 4;
Output Channels(Analog): 2;
Processor: Adi Sharc 21489@450 MHz Simd;
DSP Handling Capacity: 400 Mips, 1.6 Gflops;
Sampling Rate: 48K/24bit;
Frequency Response: (20~20kHz):±0.3dB;
Thd+N: <-94dB @17dbu;
Input Dynamic Range: 110dB;
Output Dynamic Range: 112dB;
Input Gain: 0- 50dbu;
Phantom Power: +48V/10mA Max;
Maximum Level: +18dbu;
Channel Isolation @1kHz: 108dB;
System Latency: <3ms;
Power Supply: DC12V;
|
Noise: <102dB;
Hi-Fi: Not Hi-Fi;
Activity: Passive;
Operation Mode: Wire / Remote Control;
Speaker System: Optional Combination;
Speaker Material: Wood;
Application: Commercial;
Monitor: None;
THD: <0.005%;
Type: Two-Way, Full Range System;
Frequency Response: 60Hz-20kHz ±3dB;
Power Handling: 300W(RMS)1200(Peak);
Sensitivity: 96dB;
Nominal Impedance: 8ohm;
|
