| Specification |
After-sales Service: 7*24;
Warranty: 24 Months;
Principle: Reciprocating Compressor;
Application: Back Pressure Type, High Back Pressure Type, Low Back Pressure Type;
Performance: Low Noise, Variable Frequency, Explosion-Proof;
Mute: Not Mute;
Lubrication Style: Oil-free;
Drive Mode: Electric;
Configuration: Stationary;
Power Source: AC Power;
Material: Stainless Steel;
Structural Type: Z Type Symmetrical Balance;
Inlet Pressure: >-20 Kpa;
Outlet Pressure: 70MPa;
Flow Range: 5-1000nm³/H;
Ambient Temperature: -50 to +45c;
Cooling Method: Air Cooling or Water Cooling;
Drive Method: Direct/Belt;
Flow Control: Bypass, VFD;
Atomatic: PLC, Explosion/Non-Explosion Proof;
Power: 2.2-55kw;
Gas Media: Industrial Gas, Flammable and Explosive Gas, Corro;
|
After-sales Service: 24 Hours Available on Service;
Warranty: 12 Months Since Installation;
Principle: Rotary Compressor;
Application: Back Pressure Type, High Back Pressure Type, Low Back Pressure Type, Customized;
Performance: Low Noise, Variable Frequency, Customized;
Mute: Mute;
Lubrication Style: Lubricated;
Drive Mode: Electric;
Configuration: Stationary;
Power Source: AC Power;
Material: Cast Iron;
Intake Temperature: 100°C~130°C or Install an Electric Heater;
Working Pressure: 0.4 ~ 1.6 MPa or Customizable;
Purge Air Loss: ≤4% (Purge Type) or 0% (Zero Purge Type);
Pressure Drop: ≤5%;
Intake Oil Content: ≤0.01 Ppm;
Desiccant: Activated Alumina or Silica Gel or Molecular Sieve;
Outlet Dew Point (PDP): -20°C~-100°C (≤-70°C Is Available with an Electric;
Cooling Water Temperature: ≤32°C;
Cooling Water Pressure: 0.2 ~ 0.5 MPa;
Power Supply: 220V/1pH/50Hz or 380V/3pH/50Hz or Customizable;
|
After-sales Service: 24 Hours Available on Service;
Warranty: 12 Months Since Installation;
Principle: Rotary Compressor;
Application: Back Pressure Type, High Back Pressure Type, Low Back Pressure Type, Customized;
Performance: Low Noise, Variable Frequency, Customized;
Mute: Mute;
Lubrication Style: Lubricated;
Drive Mode: Electric;
Configuration: Stationary;
Power Source: AC Power;
Material: Cast Iron;
Intake Temperature: 100°C~130°C or Install an Electric Heater;
Working Pressure: 0.4 ~ 1.6 MPa or Customizable;
Purge Air Loss: ≤4% (Purge Type) or 0% (Zero Purge Type);
Pressure Drop: ≤5%;
Intake Oil Content: ≤0.01 Ppm;
Desiccant: Activated Alumina or Silica Gel or Molecular Sieve;
Outlet Dew Point (PDP): -20°C~-100°C (≤-70°C Is Available with an Electric;
Cooling Water Temperature: ≤32°C;
Cooling Water Pressure: 0.2 ~ 0.5 MPa;
Power Supply: 220V/1pH/50Hz or 380V/3pH/50Hz or Customizable;
|
After-sales Service: 24 Hours Available on Service;
Warranty: 12 Months Since Installation;
Principle: Rotary Compressor;
Application: Back Pressure Type, High Back Pressure Type, Low Back Pressure Type, Customized;
Performance: Low Noise, Variable Frequency, Customized;
Mute: Mute;
Lubrication Style: Lubricated;
Drive Mode: Electric;
Configuration: Stationary;
Power Source: AC Power;
Material: Cast Iron;
Intake Temperature: 100°C~130°C or Install an Electric Heater;
Working Pressure: 0.4 ~ 1.6 MPa or Customizable;
Purge Air Loss: ≤4% (Purge Type) or 0% (Zero Purge Type);
Pressure Drop: ≤5%;
Intake Oil Content: ≤0.01 Ppm;
Desiccant: Activated Alumina or Silica Gel or Molecular Sieve;
Outlet Dew Point (PDP): -20°C~-100°C (≤-70°C Is Available with an Electric;
Cooling Water Temperature: ≤32°C;
Cooling Water Pressure: 0.2 ~ 0.5 MPa;
Power Supply: 220V/1pH/50Hz or 380V/3pH/50Hz or Customizable;
|
After-sales Service: 24 Hours Available on Service;
Warranty: 12 Months Since Installation;
Principle: Rotary Compressor;
Application: Back Pressure Type, High Back Pressure Type, Low Back Pressure Type, Customized;
Performance: Low Noise, Variable Frequency, Customized;
Mute: Mute;
Lubrication Style: Lubricated;
Drive Mode: Electric;
Configuration: Stationary;
Power Source: AC Power;
Material: Cast Iron;
Intake Temperature: 100°C~130°C or Install an Electric Heater;
Working Pressure: 0.4 ~ 1.6 MPa or Customizable;
Purge Air Loss: ≤4% (Purge Type) or 0% (Zero Purge Type);
Pressure Drop: ≤5%;
Intake Oil Content: ≤0.01 Ppm;
Desiccant: Activated Alumina or Silica Gel or Molecular Sieve;
Outlet Dew Point (PDP): -20°C~-100°C (≤-70°C Is Available with an Electric;
Cooling Water Temperature: ≤32°C;
Cooling Water Pressure: 0.2 ~ 0.5 MPa;
Power Supply: 220V/1pH/50Hz or 380V/3pH/50Hz or Customizable;
|
