| Specification |
Power Supply: AC 220V Plus or Minus 10%, 50Hz;
Power: < 2.5kw;
Detection Temperature Point: -35, -30, -25, -20, -15, -10, -5 Degrees Celsius;
Viscosity Measurement Range: 1200 ~ 27000 MPa.S;;
Temperature Range: Room Temperature ~ -70 ° C;
Cold Bath Temperature Control Accuracy: ±0.1 °c;
Environmental Humidity: < 85%;
|
After-sales Service: 24 Hours Online;
Warranty: 1 Year;
Measuring Range: 40mm;
Temperature Measurement Range: -50~125°C;
Power Supply: AC220V±10%,50Hz;
Weight: 15kg;
Power: 500W;
|
After-sales Service: Lifetime Technical Support;
Warranty: 1year;
Feeding Capacity: 33 Liters, 66 Liters, 108 Liters;
Discharge Capacity: 30 Liters, 60 Liters, 100 Liters;
Stir Evenly for a Long Time: ≤45 Seconds;
Mixer Speed: 35 Revolutions Per Minute;
Motor Power: 1.5 Kilowatts 3.0 Kilowatts;
Power Supply Voltage: 380V or Others;
|
After-sales Service: Lifetime Technical Support;
Warranty: No;
1L: Inner Diameter 108±0.3mm, Clear Height 109±0.5mm,;
2L: 152±0.3mm 156mm±0.5mm 3±0.1mm;
3L: 183±0.3mm 153mm±0.5mm 3±0.1mm;
5L: 185±0.4 186±0.7mm 3±0.1mm;
10L: 208±0.5 249±1mm 3±0.1mm;
20L: 294±0.5mm 249±1mm 4±0.2mm;
30L: 360±0.5mm 249±1mm 5±0.2mm;
50L: 295±2 mm 550±10mm 5±0.2mm;
Other Specifications: Customizable at Will;
|
After-sales Service: Lifetime Technical Support;
Warranty: 1year;
Test Mold1: The Upper Diameter Is 160mm;
Test Mold2: Lower Diameter: 150mm;
Test Mold3: Depth: 150mm;
Maximum Penetration Force: 1000n;
Penetration Depth: 25mm;
Cross-Sectional Area of The Penetration: 100mm ² 50mm ² 20mm2;
Minimum Graduation Value: 1n;
Indication Error: ±1n;
Maximum Force Measurement: 1200n;
Measure The Area of The Needle Circle: 100mm ², 50mm ², 20mm ²;
|