| Specification |
Type: Fire Alarm Panel;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥90dB;
Wiring Mode: 2 Wires System;
Product Name: Fire Alarm Panel;
Main Power Supply: 90 to 270VAC, 50Hz;
Backup Battery: 2 PCS Lead Acid Battery;
Power Supply Rating: 3 AMPS @ 24VDC;
Initiating Device Circuits: 4 - 16 Detection Zones;
Notification Appliance Circuits: 1 - 4 Sounder Lines;
Zone Capacity: 25 - 30 Detectors;
Disabled Function: Yes;
Emergency Evacuate Function: Yes;
Relay Output: Fire & Fault & Supervisory;
Relay Contact Rating: 2A & 30VAC, Resistive;
Mode Selection: Auto & Manual;
Standard: EN54-2 & EN54-4;
Dimension: 440X370X100 mm;
Application: Office, Factory, Warehouse, Apartment, Hotel, etc.;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Alarm;
Receive Frequency: 485/232;
Wiring Mode: Sub-Line System;
Weight: 7kg;
Color: Red;
Number of Zones: 4;
Primary AC: 90-270VDC;
Standby Battery: 2*12V;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Alarm;
Receive Frequency: 485/232;
Wiring Mode: Sub-Line System;
Weight: 7kg;
Color: Red;
Number of Zones: 4;
Primary AC: 90-270VDC;
Standby Battery: 2*12V;
|
