I . Technical parameters
Operating voltage: DC12V
Operating current: 10MA
Frequency available: Fixed frequency 315/433.92MHz (We can do customized frequency)
Ambient temperature : -20 ºC ~ +50 ºC
Kelvin 4-Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors , Gates doors, Alarm systems etc. Fixed
frequency (433.92mhz or 315mhz) for copying 99.99% common fixed and learning code remote controls.
Face to face copy the functions of your original remote by this 4-channel RF remote control duplicator with code learning
functions and you'll always have a back up.
Duplicate Your Existing Remote Controllers:
1.  Vehicle central locking systems
2.  Garage doors
3.  Electronic gates
4.  Electrical appliances
5.  Car sunroofs
6.  Heating systems
Easy to install and use, the 4 channel remote control system lets you take control of your gadgets, car and home or garage.
Works with the following remote control modules (please check your existing remote control before ordering): Your remotes
also should be Fixed code or Learning code.
•2260, 2262, FP527, HT12D , HT12E , PT2240, S026-1 ,S026-2 ,S026-3 ,S026-4, SMC918.... etc
Please note this does not copy rolling code
Methods of operation
1, Clear out code:
To Clear up test stored rf signal memory from factory by pressing the locking key and unlock the key at the same
time, two seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. Indicates
that the remote control codes stored has been cleared out.
2, Duplicating (learning)
Hands are holding remote control , and the other are holding the duplicating remote control, 2 remote controls
put together as close as possible, while pressing the remote controls two match button,(eg: A-A',B-B') three
seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. This indicates that
this copy of the remote control buttons are same as copied on the remote control button codes . Several other
keys are also according to the above approach to learning.
3, Recovery code
If the code copied have been mistakenly removed the remote control, you do not worry, the remote control can
restore yourself. Method is pressing (up-down eg: locking key and bell key) two buttons (metal shell remote
control on the left, the plastic shell remote control on the right) at the same time ,3 seconds later, LED indicator
light flashes three times, followed by a continuous fast blinking. This indicates that the original remote control
codes have been restored.
The other way, you can delete all and relearn them agai