Lead Acid Battery Machine - Acid Recirculation System

Application: For the formation of flooded battery.

System component: Acid preparation and storage module, acid circulation module, acid filtering and cooling module, scrubber, electrical control module

The maximum load of each circuit: 288pieces / 2V

Working Pressure: ≤ 1.0Mpa

Acid Temperature: ≤ 50° C

Chemical Cycle: ≤ 38H (traction batteries)

Equipment Power: 10KW

Solenoid valves and electrical components controlling voltage: DC24C

Circuit size: 9500× 2000× 5000(mm)

Characteristics:

with the acid circulation system, the battery production cycle can be reduced by 3- 4 days.

The quantity of the battery can be set according to the technical requirements. (Maximum 288pieces)

with the acid heat exchange, water cost can be reduced, in order to save energy.

The tank formation and plate drying process are replaced by acid circulation in order to reduce the plate size.

The problems caused by the cold joint during the welding formation process.

The acid circulation works in sealed negative pressure condition, no mist overflow, no pollution, good environmental performance.

The battery produced by the acid circulation, the active material is totally converted, the battery are of good consistency.

The system pressure and acid transferring speed can be

The adjusted according to the battery temperature.

After collecting, the hot acid can be filtrated, to ensure the cleanliness and temperature of the acid.

Initial capacity of the battery can be increased by 10%.

PLC controlling system works with high precision, it is reliable and stable.

During the acid circulation process, the acid density can be adjusted, to ensure the electrolyte density of the battery.

Cycling equipments, acid filling devices, acid mixing devices can be simplified, in order to reduce the investment cost.