OPERATING PRINCIPLE:
The core part of one step injection and blowing technics is a trianular tranfer head, The mandrils are assembled on the side face of the triangular trasfer head which turn over to 120degrees.

STATION A: PREFORM INJECTION
The bottle neck will be molded accurately after injecting the material into the cavity, After proper control, the mold open and the mandrils to...Along with the cavity.

STATION B: BLOW MOLDING
Blowing action wa done at this part, molding would be completed after cooling. (bottles shape decides the number of cavity). The air came out from the mandrils huffs the cavity cling to the mold. Then the mold open and the mandrils turn to...Along with bottles.

STATION C: STRIPPER
The bottles automatically will be ejected from the core rods at this position and then to be packed. The three actions of injection. Blowing and Ejection work at the same time. Which makes the machine of high effiency and low waste.

APPLICATION FIELD:
1. Pharmacy industry
2. Chenmical industry
3. Food industry
4. Cosmetic industry

PRODUCT FEATURES:
Excellent machanical strength. Impact-resisting, and non-cracking.
Bottle mouth and screw thread are of precise measurement, enable 100%close matching with the bottle cap.
The wei of the product can be pre-setted.
The maeasurement and thickness of product can meet the requirement of the design without any dvation
The surface of the bottle mouth and the body is bright and smoonthness.
No defleshing and trimming save the material cost.
There is no joint seam at the botom, and the strength is improved accordingly.
The joint seam on the bottle body is smooth

Main Features:
The clamping franework adopts single-crossbeam, double pillars, which enlarges the space of setting mould, will be easier to install mould.
Adoption of tie-bar protection makes open/clamping mould work while transfer table rise/fall, so the production effeciency improve obviously. (Optional)
Injection clamping adopts the structure of three oil vats and small supply-oil case, hence the speed of open/clamping will be quicker and the bearing pressure of mould will be more equally.
Special thickness working platform with QT material assure machine run stably, clamping well, anti-distortion.
Use servo motor system, save power consumption 30% or so.